 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DVFL2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVFL series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating. Unique to the DVFL series is a magnetic feedback circuit that is radiation immune. Operating at a nominal fixed frequency of 500 kHz, these regulated, isolated units utilize well-controlled undervoltage lockout circuitry to eliminate slow start-up problems. The current sharing function allows a maximum of five units to be connected in parallel to boost the total output power to 5 times. The output voltage is trimmable up to +10% or down -20%. These converters are designed and manufactured in a facility qualified to ISO9001 and certified to MILPRF-38534 and MIL-STD-883. This product may incorporate one or more of the following U.S. patents: 5,784,266 5,790,389 5,963,438 5,999,433 6,005,780 6,084,792 6,118,673 FEATURES * * * * * * * * * * * * * * * * * * * High Reliability Parallel Up to 5 Units With Current Sharing Output Voltage Trim Up +10% or Down -20% Wide Input Voltage Range: 16 to 40 Volts per MIL-STD-704 Up to 120 Watts Output Power Radiation Immune Magnetic Feedback Circuit NO Use of Optoisolators Undervoltage Lockout Indefinite Short Circuit Protection Current Limit Protection Industry Standard Pinout Input Transient Voltage: 50 Volts for 1 second Radiation Hardened Version Available Precision Seam Welded Hermetic Package High Power Density: > 80 W/in3 Custom Versions Available Additional Environmental Screening Available Meets MIL-STD-461C and MIL-STD-461D EMC Requirements When Used With a DVME28 EMI Filter MIL-PRF-38534 Element Evaluated Components Figure 1 - DVFL2800S DC-DC Converter (Not To Scale) 11314 4th Avenue West, Suite 206 Everett, WA 98204 http://www.vpt-inc.com Sales Information: Phone: (425) 353-3010 Fax: (425) 353-4030 E-mail: vptsales@vpt-inc.com 1X010DSF 1 DVFL2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 40 VDC 50 Volts 120 Watts 41 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (No Pin Extensions) DVFL283R3S Min 16 0 0 4 4 +15C -65C to +150C 270C 86 Grams Parameter STATIC INPUT 4 Voltage Conditions DVFL2805S Max 40 50 6 70 120 80 1.5 1.0 13.5 8.0 16.0 15.5 3.333 3.35 66 20 80 20 80 10 3.0 80 80 1000 600 600 - Typ 28 3.30 3.30 500 400 Min 16 0 0 10.5 5.0 14.5 14.0 4.95 4.925 0 -20 2.0 72 425 500 100 - Typ 28 5.00 5.00 500 400 Max 40 50 6 70 120 80 1.5 1.0 13.5 8.0 16.0 15.5 5.05 5.075 100 20 80 20 100 10 3.0 80 80 1000 600 600 - Units Continuous Transient, 1 sec Inhibited 1 Inhibited 2 No Load Full Load, 20Hz to 10MHz 4 4 V V mA mA mA mAp-p V V V V V V V V W A mVp-p mV mV % V % W W F kHz kHz M kHrs Current Ripple Current INH1 Pin Input INH2 Pin Input INH1 Pin Open Circuit Voltage INH2 Pin Open Circuit Voltage UVLO Turn On UVLO Turn Off OUTPUT Voltage Power Current Ripple Voltage Line Regulation Load Regulation Voltage Trim EFFICIENCY 4 4 4 10.5 5.0 14.5 14.0 VOUT VOUT VOUT VOUT VOUT VOUT VOUT TCASE = 25C TCASE = -55C to +125C 3.267 3.25 0 - Full Load, 20Hz to 10MHz VIN = 16V to 40V No Load to Full Load Full Load -10 2.0 68 Share Pin Voltage LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD 4 Overload 4 425 Short Circuit SWITCHING FREQUENCY SYNC FREQUENCY RANGE ISOLATION MTBF (MIL-HDBK-217F) VH - VL = 5V Duty Cycle = 20% - 80% 500 VDC AIF @ TC = 55C 500 100 - Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X010DSF 2 DVFL2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 40 VDC 50 Volts 120 Watts 41 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (No Pin Extensions) DVFL283R3S Min - +15C -65C to +150C 270C 86 Grams Parameter DYNAMIC Load Step Output Transient Load Step Recovery Line Step Recovery Turn On Delay Turn On Overshoot Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2 4 Conditions DVFL2805S Max 400 500 600 500 20 15 Typ 300 300 - Min - Typ 300 300 - Max 400 500 600 500 20 25 Units VOUT VOUT VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V mVPK Sec mVPK Sec mSec mVPK Line Step Output Transient 2, 4 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X010DSF 3 DVFL2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 40 VDC 50 Volts 120 Watts 41 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (No Pin Extensions) DVFL2812S Min 16 0 0 4 4 +15C -65C to +150C 270C 86 Grams Parameter STATIC INPUT 4 Voltage Conditions DVFL2815S Max 40 50 6 70 120 80 1.5 1.0 13.5 8.0 16.0 15.5 12.12 12.18 110 9.2 80 20 120 10 3.0 80 80 500 600 600 - Typ 28 12.00 12.00 500 400 Min 16 0 0 10.5 5.0 14.5 14.0 14.85 14.775 -20 2.0 80 425 500 100 - Typ 28 15.00 15.00 500 400 Max 40 50 6 70 120 80 1.5 1.0 13.5 8.0 16.0 15.5 15.15 15.225 120 8.0 80 20 120 10 3.0 80 80 500 600 600 - Units Continuous Transient, 1 sec Inhibited 1 Inhibited 2 No Load Full Load, 20Hz to 10MHz 4 4 V V mA mA mA mAp-p V V V V V V V V W A mVp-p mV mV % V % W W F kHz kHz M kHrs Current Ripple Current INH1 Pin Input INH2 Pin Input INH1 Pin Open Circuit Voltage INH2 Pin Open Circuit Voltage UVLO Turn On UVLO Turn Off OUTPUT Voltage Power Current Ripple Voltage Line Regulation Load Regulation Voltage Trim EFFICIENCY 4 4 4 10.5 5.0 14.5 14.0 VOUT VOUT VOUT VOUT VOUT VOUT VOUT TCASE = 25C TCASE = -55C to +125C 11.88 11.82 - Full Load, 20Hz to 10MHz VIN = 16V to 40V No Load to Full Load Full Load -20 2.0 79 Share Pin Voltage LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD 4 Overload 4 425 Short Circuit SWITCHING FREQUENCY SYNC FREQUENCY RANGE ISOLATION MTBF (MIL-HDBK-217F) VH - VL = 5V Duty Cycle = 20% - 80% 500 VDC AIF @ TC = 55C 500 100 - Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X010DSF 4 DVFL2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 40 VDC 50 Volts 120 Watts 41 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (No Pin Extensions) DVFL2812S Min - +15C -65C to +150C 270C 86 Grams Parameter DYNAMIC Load Step Output Transient Load Step Recovery Line Step Recovery Turn On Delay Turn On Overshoot Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2 4 Conditions DVFL2815S Max 800 500 1200 500 20 50 Typ 600 300 - Min - Typ 600 300 - Max 800 500 1200 500 20 50 Units VOUT VOUT VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V mVPK Sec mVPK Sec mSec mVPK Line Step Output Transient 2, 4 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X010DSF 5 DVFL2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 40 VDC 50 Volts 120 Watts 41 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (No Pin Extensions) DVFL285R2S Min 16 0 0 4 4 +15C -65C to +150C 270C 86 Grams Parameter STATIC INPUT 4 Voltage Conditions Typ 28 5.20 5.20 500 400 Max 40 50 6 70 120 80 1.5 1.0 13.5 8.0 16.0 15.5 5.252 5.278 100 19.2 80 20 100 10 3.0 80 80 1000 600 600 - Units Continuous Transient, 1 sec Inhibited 1 Inhibited 2 No Load Full Load, 20Hz to 10MHz 4 4 V V mA mA mA mAp-p V V V V V V V V W A mVp-p mV mV % V % W W F kHz kHz M kHrs Current Ripple Current INH1 Pin Input INH2 Pin Input INH1 Pin Open Circuit Voltage INH2 Pin Open Circuit Voltage UVLO Turn On UVLO Turn Off OUTPUT Voltage Power Current Ripple Voltage Line Regulation Load Regulation Voltage Trim EFFICIENCY 4 4 4 10.5 5.0 14.5 14.0 VOUT VOUT VOUT VOUT VOUT VOUT VOUT TCASE = 25C TCASE = -55C to +125C 5.148 5.122 - Full Load, 20Hz to 10MHz VIN = 16V to 40V No Load to Full Load Full Load -20 2.0 72 Share Pin Voltage LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD 4 Overload 4 425 Short Circuit SWITCHING FREQUENCY SYNC FREQUENCY RANGE ISOLATION MTBF (MIL-HDBK-217F) VH - VL = 5V Duty Cycle = 20% - 80% 500 VDC AIF @ TC = 55C 500 100 - Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X010DSF 6 DVFL2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 40 VDC 50 Volts 120 Watts 41 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (No Pin Extensions) DVFL285R2S Min - +15C -65C to +150C 270C 86 Grams Parameter DYNAMIC Load Step Output Transient Load Step Recovery Line Step Recovery Turn On Delay Turn On Overshoot Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2 4 Conditions Typ 300 300 - Max 400 500 600 500 20 25 Units VOUT VOUT VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V mVPK Sec mVPK Sec mSec mVPK Line Step Output Transient 2, 4 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X010DSF 7 DVFL2800S Series BLOCK DIAGRAM PIN 1 28V IN PIN 7 +V OUT PIN 8 OUT COM IN CO M PIN 2 Q1 MAGNETIC FEEDBACK VOLTAGE AND CURRENT AMPLIFIERS PIN 3 PIN 10 PIN 9 PIN 11 PRIMARY HOUSEKEEPING SUPPLY INH1 SYNC IN SYNC OUT PIN 4 PIN 6 PIN 5 PWM CONTRO L PIN 12 TRIM +S -S SHARE INH2 UNDER VOLTAGE SHUTDOWN SECO NDARY HOUSEKEEPING SUPPLY Figure 2 CONNECTION DIAGRAM 1 28V IN 6 SYNC IN 28 Vdc +V OUT +S 10 INH2 -S 2 IN COM OUT COM 8 9 12 LOAD 7 + - 4 INH1 Figure 3 1X010DSF 8 DVFL2800S Series INHIBIT DRIVE CONNECTION DIAGRAM 28V IN 1 30K OPTOISOLATOR INH1 4 BIAS 1 2K BIAS 2 12 INH2 12V 8V OPTIONAL CAPACITOR IN COM 2 + 8 OUT COM Figure 4 - Isolated Inhibit Drive and Internal Equivalent Circuit (Shown with optional capacitor for turn-on delay) EMI FILTER HOOKUP DIAGRAM DVME28 EMI FILTER 1 28V IN 2 28V IN 3 28 Vdc 28V OUT 10 28V IN 4 IN COM 5 IN COM 6 IN COM OUT COM OUT COM 7 CASE 2 OUT COM 8 -S IN COM OUT COM 8 28V OUT 9 4 INH1 9 INH2 12 LOAD 28V OUT 11 6 SYNC IN 12 1 28V IN +V OUT +S 10 DVFL2800S DC-DC CONVERTER 7 + - Figure 5 - Converter with EMI Filter 1X010DSF 9 DVFL2800S Series PARALLEL CONNECTION DIAGRAMS DVME28 EMI FILTER 1 28V IN 2 28V IN 3 28 Vdc 28V OUT 10 28V IN 4 IN COM 5 IN COM 6 IN COM OUT COM OUT COM 7 2 IN COM OUT COM 8 CASE 1 28V IN 6 SYNC IN 4 INH1 9 -S 2 IN COM OUT COM 8 CASE +V OUT +S 10 CASE DVFL2800S DC-DC CONVERTER 7 OUT COM 8 -S 28V OUT 9 4 INH1 9 LOAD 28V OUT 11 6 SYNC IN 12 1 28V IN +V OUT +S 10 DVFL2800S DC-DC CONVERTER 7 + - Figure 6 - Parallel Connection without Current Sharing 1X010DSF 10 DVFL2800S Series PARALLEL CONNECTION DIAGRAMS DVME28 EMI FILTER 1 28V IN 2 28V IN 3 28 Vdc 28V OUT 10 28V IN 4 IN COM 5 IN COM 6 IN COM OUT COM OUT COM 7 2 IN COM OUT COM OUT COM 8 5 SYNC OUT -S 8 28V OUT 9 4 INH1 9 SHARE 28V OUT 11 6 SYNC IN 11 LOAD 12 1 28V IN +V OUT 10 +S DVFL2800S DC-DC CONVERTER 7 + - CASE 1 28V IN 6 CASE DVFL2800S DC-DC CONVERTER 7 +V OUT 10 +S SYNC IN 11 4 INH1 5 SYNC OUT 2 IN COM OUT COM -S 8 9 SHARE CASE DVFL2800S DC-DC CONVERTER 1 28V IN 6 SYNC IN 11 4 INH1 9 -S 2 IN COM OUT COM 8 SHARE +V OUT 10 +S 7 CASE Figure 7 - Current Sharing Parallel Connection for Multiple Converters 1X010DSF 11 DVFL2800S Series OUTPUT VOLTAGE TRIM The output voltage can be trimmed down by connecting a resistor between the TRIM pin (PIN 3) and the +V OUT pin (PIN 7), or can be trimmed up by connecting a resistor between the TRIM pin (PIN 3) and the OUT COM pin (PIN 8). The maximum trim range is +10% up and -20% down. The appropriate resistor values versus the output voltage are given in the trim table below. Figure 8 - Output Voltage Trim DVFL283R3S +VOUT (V) 3.60 3.55 3.50 3.45 3.40 3.35 3.30 3.25 3.20 3.15 3.10 3.05 3.00 RTRIM () 68.3k 85k 110k 151.7k 235k 485k 135k 55k 28.3k 15k 7k 1.7k DVFL2805S +VOUT (V) 5.5 5.4 5.3 5.2 5.1 5.0 4.9 4.8 4.7 4.6 4.5 4.4 4.3 4.2 4.1 4.0 RTRIM () 35k 47.5k 68.3k 110k 235k 225k 100k 58.3k 37.5k 25k 16.7k 10.7k 6.3k 2.8k 0 DVFL285R2S +VOUT (V) 5.7 5.6 5.5 5.4 5.3 5.2 5.1 5.0 4.9 4.8 4.7 4.6 4.5 4.4 4.3 4.2 RTRIM () 35k 47.5k 68.3k 110k 235k 245k 110k 65k 42.5k 29k 20k 13.6k 8.8k 5k 2k DVFL2812S +VOUT (V) 13.2 13.0 12.8 12.6 12.4 12.2 12.0 11.8 11.6 11.4 11.2 11.0 10.8 10.6 10.4 10.2 10.0 9.8 9.6 RTRIM () 5.8k 10k 16.2k 26.6k 47.3k 109k 454k 213k 134k 94k 70.1k 54.3k 42.9k 34.4k 27.8k 22.5k 18.2k 14.6k DVFL2815S +VOUT (V) 16.50 16.25 16.00 15.75 15.50 15.25 15.00 14.75 14.50 14.25 14.00 13.75 13.50 13.25 13.00 12.75 12.50 12.25 12.00 RTRIM () 1.7k 5k 10k 18.3k 35k 85k 475k 225k 142k 100k 75k 58.3k 46.4k 37.5k 30.6k 25k 20.5k 16.7k 1X010DSF 12 DVFL2800S Series EFFICIENCY PERFORMANCE CURVES (TCASE = 25C, Full Load, Unless Otherwise Specified) VIN = 16V VIN = 28V VIN = 40V 85 85 80 80 Efficiency (%) Efficiency (%) 75 75 70 70 65 10 20 30 40 50 60 70 Output Pow er (W) 20 40 60 Output Pow er (W) 80 100 Figure 9 - DVFL283R3S Efficiency (%) vs. Output Power (W) Figure 10 - DVFL2805S / DVFL285R2S Efficiency (%) vs. Output Power (W) 90 90 85 85 Efficiency (%) 80 Efficiency (%) 80 75 75 70 30 50 70 Output Pow er (W) 90 110 70 30 50 70 Output Pow er (W) 90 110 Figure 11 - DVFL2812S Efficiency (%) vs. Output Power (W) Figure 12 - DVFL2815S Efficiency (%) vs. Output Power (W) 1X010DSF 13 DVFL2800S Series EMI PERFORMANCE CURVES (TCASE = 25C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) Figure 13 - DVFL2800S without EMI Filter Figure 14 - DVFL2800S with EMI Filter 1X010DSF 14 DVFL2800S Series PACKAGE SPECIFICATIONS TOP VIEW PIN 1 2 3 4 5 6 7 8 9 10 11 12 FUNCTION 28V IN IN COM TRIM INH1 SYNC OUT SYNC IN +V OUT OUT COM -S +S SHARE INH2 SIDE VIEW Figure 15 - Package and Pinout (Pin Length is 0.01", Other Dimensional Limits are 0.005" Unless Otherwise Stated) 1X010DSF 15 DVFL2800S Series PACKAGE SPECIFICATIONS (DOWN-LEADED) TOP VIEW PIN 1 2 3 4 5 6 7 8 9 10 11 12 SIDE VIEW Figure 16 - Package and Pinout (With Down-Leaded Pin Extensions Added) (Pin Length is 0.01", Other Dimensional Limits are 0.005" Unless Otherwise Stated) FUNCTION 28V IN IN COM TRIM INH1 SYNC OUT SYNC IN +V OUT OUT COM -S +S SHARE INH2 1X010DSF 16 DVFL2800S Series PACKAGE SPECIFICATIONS (UP-LEADED) TOP VIEW PIN 1 2 3 4 5 6 7 8 9 10 11 12 FUNCTION 28V IN IN COM TRIM INH1 SYNC OUT SYNC IN +V OUT OUT COM -S +S SHARE INH2 SIDE VIEW Figure 17 - Package and Pinout (With Up-Leaded Pin Extensions Added) (Pin Length is 0.01", Other Dimensional Limits are 0.005" Unless Otherwise Stated) 1X010DSF 17 DVFL2800S Series PACKAGE PIN DESCRIPTION Pin 1 2 3 4 5 6 7 8 9 10 11 12 Function 28V IN IN COM TRIM INH1 SYNC OUT SYNC IN +V OUT OUT COM -S +S SHARE INH2 Description Positive Input Voltage Connection Input Common Connection Trim Output Voltage to +10%, -20% of Nominal Value Logic Low = Disabled Output. Connecting the inhibit(1) pin to input common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. Output Synchronization Signal Input Synchronization Signal Positive Output Voltage Connection Output Common Connection Return Sense Positive Sense Current Share Logic Low = Disabled Output. Connecting the inhibit(2) pin to output common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. 1X010DSF 18 DVFL2800S Series ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534) Extended /ES * * HB /HB * * * * Class H /H * * * * Class K /K * * * * * * * Screening NonDestructive Bond Pull Internal Visual Temperature Cycling Constant Acceleration PIND Pre Burn-In Electrical MIL-STD-883 Standard (No Suffix) Method 2023 Method 2017, 2032 Internal Procedure Method 1010, Condition C Method 1010, -55C to 125C Method 2001, 3000g, Y1 Direction Method 2001, 500g, Y1 Direction Method 2020, Condition A2 100% at 25C Method 1015, 320 hours at +125C Method 1015, 160 hours at +125C 96 hours at +125C 24 hours at +125C MIL-PRF-38534, Group A1 100% at 25C Method 1014, Fine Leak, Condition A Method 1014, Gross Leak, Condition C -3 Dip (1 x 10 ) Method 20123 Method 2009 * * * * Burn-In * * * * * Final Electrical * * * * * * Hermeticity * * * * * * * Radiography External Visual * * * * * * Notes: 1. 2. 3. 100% R&R testing at -55C, +25C, and +125C with all test data included in product shipment. PIND test Certificate of Compliance included in product shipment. Radiographic test Certificate of Compliance and film(s) included in product shipment. 1X010DSF 19 DVFL2800S Series ORDERING INFORMATION DVFL 1 28 2 05 3 S 4 R 5 DL 6 /HB 7 - XXX 8 (1) Product Series DVFL (2) Nominal Input Voltage 28 28 Volts (3) Output Voltage 3R3 05 5R2 12 15 3.3 Volts 5 Volts 5.2 Volts 12 Volts 15 Volts (4) Number of Outputs S Single (5) Rad-Hard Option2 None R Standard 100 kRad (6) Package Option None DL UL Standard Down-Lead Up-Lead (7) Screening Code1,3 None /ES /HB /H /K Standard Extended HB Class H Class K (8) Additional Screening Code Contact Sales Notes: 1. 2. 3. Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products. VPT Inc. is not currently qualified to a DSCC certified radiation hardness assurance program. VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or other higher quality applications. 1X010DSF 20 DVFL2800S Series SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS Standard Microcircuit Drawing (SMD) *T.B.D. *T.B.D. *T.B.D. *T.B.D. *T.B.D. DVFL2800S Series Similar Part Number DVFL283R3S/H DVFL2805S/H DVFL285R2S/H DVFL2812S/H DVFL2815S/H Do not use the DVFL2800S Series similar part number for SMD product acquisition. It is listed for reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD's can be downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA (Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead finishes, and radiation levels. CONTACT INFORMATION To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales Department at: Phone: Fax: E-mail: (425) 353-3010 (425) 353-4030 vptsales@vpt-inc.com All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or omissions. The products or specifications contained herein are subject to change without notice. 1X010DSF 21 |
Price & Availability of DVFL283R3SULES-XXX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |